Macap Leo 55 Espresso Coffee Grinder

From: $534.00

Request a price match.

Small footprint of a quality espresso grinder with the capability of triple dosing.


┌ Special Deals ┐

Discounted models?
We may have some open box / refurbished / “Sidewalk Sale” / demo units available for sale from time to time. Use the “Search” button to see if any are available.
Earn 534-610 EspressoPoints worth $16.02-$18.30! (Learn about EspressoPoints)
Earn 534-610 EspressoPoints worth $16.02-$18.30! (Learn about EspressoPoints)

Macap Leo 55 Doserless Espresso Coffee Grinder

25%OffMacapLeoCropped-2.5 copy

The Macap Leo 55 Espresso Coffee Grinder is a high-end coffee grinder made in Italy that features large 55mm flat steel burrs, a powerful motor, and a stepless grind adjustment system.

See our first impressions of the Macap Leo 55 grinder on our YouTube Channel

The Leo 55 is very similar to the Leo 55 Essential. The hopper, burr size, & motor are all the same. The only difference is the on-demand controls. The grind settings on the Leo 55 are controlled by hand and grind operations are controlled by your portafilter. For the Leo 55 Essential, all settings and grind operations are controlled by hand.  Choosing between the 2 grinders is all a matter of preference.

The Specialità from Eureka is another similar model. They both have 55 mm flat burrs and a similar footprint on your countertop. Both bean hoppers hold approximately 300 grams of roasted coffee beans. However the Specialità has a low profile shape which saves an extra inch off the height. The on-demand controls are simple for both grinders, but the Leo 55 is the one that has a triple dosing option. Combining this with the larger motor & grinding speed makes production a little faster and the clear choice.

Macap Leo 55 Grinding Adjustment

Grinding adjustment

  • Stepless – Gives an infinite number of grind settings which allows you really fine-tune your grind fineness. The adjustment knob is located on the back right of the grinder The entire dial is numbered so you can remember your current grind setting easier. Turn clockwise for a finer grind and counterclockwise for a coarser grind.
  • Solid aluminum knob – Built to last over long years of use.
Macap Leo Grinding Burrs

Grinding burrs

  • Flat burrs – Large size at 55 mm. The larger the size, the more of a grinding surface, resulting in faster production.
  • Easy access – Remove the bean hopper. The 3 center Allen key screws on the top hold the upper burr carrier.
  • Very, very little retention in doserless chute.

ALE55120US-portafilter-fork

Portafilter fork

  • Ease of use – Allows you to rest your portafilter while grinding for a complete hands-free operation. Accommodates most portafilters.
  • Adjustable – There is an Allen key screw that you can adjust to fit your portafilter.
  • Removable – You can remove the fork if you wish to grind into a container.
  • Rubber coating – The top of the fork has a rubber coating to reduce vibration and prevent scratching the portafilter.
Macap Leo Bean Hopper

Bean hopper

  • Low profile – The total height of the grinder without the hopper is approximately 9.5″. The bean hopper adds another 5.5″ bringing the total height to approximately 15″. The total capacity is approximately 300 grams.
  • Stopper – A door near the bottom of the hopper can be pushed in to close the opening. This allows you to remove the hopper with beans inside so you can easily change the beans. There will be some beans already passed in the burrs which will have to be ground out first before removing the hopper.
ALE55120US-digital-display

Electronic controls

  • Multiple dosing options – Press the center circular graphic on the screen to switch between single-cup dosing, double-cup dosing, triple dosing (OFF by default), and semi-automatic dosing.
  • Time-based grinding – You can adjust the time for each automatic dose from 2.2 seconds up to 30 seconds. You can make very tiny adjustments in 0.1-second increments. You can lock these settings by pressing and holding the circular graphic button for 3 seconds. This helps prevent other users from accidentally changing the dosing times.
  • Dosing count – This helps keep track of usage. You can access it by holding the circular graphic for 8 seconds. Once the screen changes, use the “+” and “-” buttons to switch between the options. You also have options to turn triple dosing & semi-automatic dosing ON or OFF.
Macap Leo Operation

Easy operation

  • Power button – Located in the lower back of the grinder.
  • Select grind mode – Simple controls with easy-to-understand display.
  • Start grinding – Use your portafilter to activate the push button.
  • Also quiet operation – ~ 72 +/-3dB (depends upon environment)
Notes

Espresso Coffee Grinder Warnings:

  • Changing grind settings: It is very important to only change grind settings when the unit is powered on and the burrs are in motion. If you do not do this, the burrs will ‘gunk’ up and render the grinder to only produce very coarse grinds or no grinds at all. To remedy this, you will have to open up the grinder to get access to the grinding burrs. This issue will be considered operator error for lack of following directions, and not be classified as a defective grinder.
  • Electrical cord: For most grinders, the cord is placed between the packaging (foam or cardboard) and the underside body of the grinder. During shipping, it is normal for a bend or insignificant blemish/slice to damage the cord.
  • Finding coffee grinds in a new grinder: Most manufacturers test their grinders with coffee beans before they leave their facility. Unfortunately, they are not always able to get every trace of coffee out of the grinders after testing. As a result, you may find coffee beans or grinds inside your grinder, or there may be grinds in the packaging.
  • Static issues: There are static issues with all grinders, even the highest-quality models. We firmly believe that the static comes from the coffee beans. If you are having static problems with your coffee grinder, try using a different blend of beans.
  • Electrical: To avoid electrical damage (which is not considered a manufacturer’s defect), please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. A surge without protection can damage a grinder at the power switch, the capacitor, the motor, or the wiring.
  • Burr cleaning: For routine maintenance of the grinding burrs, we recommend using grinder cleaning agents. We do not recommend any removal of the burrs or the burr carrier for cleaning (unless necessary) as re-assembly can cause damage.
  • Replacing burrs: NEVER use a flathead screwdriver and hammer to wedge under the burrs for removal. This could badly damage your grinder.


Specifications

Brand

Macap

Height (inches)

15, approximate

Width (inches)

5.25, approximate

Depth (inches)

7.25, approximate

Weight (pounds)

14

Wattage (watts)

390

Voltage (volts)

110 – 120

Burr size (mm), Type

55, flat

Grinding speed (RPM)

1680

Hopper capacity (grams)

300

Approvals

CE

Country of manufacture

Italy

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “Macap Leo 55 Espresso Coffee Grinder”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Ask a question

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

      Is the mechanism that holds, lifts, and lowers the top bur to adjust the grind fineness, made of metal or plastic?
    1. 0 votes
      Q Is the mechanism that holds, lifts, and lowers the top bur to adjust the grind fineness, made of ...... Read more answer now
      Asked by David Martin on December 19, 2023 11:41 pm
      Answered by the admin

      The burr holder is currently made of metal.

      Macap Leo Top Burr Carrier

       

    2. In what country is this product made?
    3. 0 votes
      Q In what country is this product made? answer now
      Asked by Orleonok Pitkin on November 17, 2023 1:56 am
      Answered by the admin

      The Leo 55, including the motor, is made in Italy

    4. Does the Macap Leo 55 have a manual grinding capability, i.e. where one can grind outside of the set timing parameters?
    5. 0 votes
      Q Does the Macap Leo 55 have a manual grinding capability, i.e. where one can grind outside of the ...... Read more answer now
      Asked by alberto.acosta on August 1, 2023 11:04 pm
      Answered by the admin

      Hi,

      Pressing the center circular graphic on the touchpad switches between single-cup dosing, double-cup dosing, triple dosing (OFF by default), and semi-automatic (manual) dosing.

    6. How does this compare w/ the 55mm Eureka Mignons? Seems very similar. Curious on 1) grind quality and 2) noise.
    7. 0 votes
      Q How does this compare w/ the 55mm Eureka Mignons? Seems very similar. Curious on 1) grind quality...... Read more answer now
      Asked by Jeff on March 12, 2023 8:44 pm
      Answered by the admin

      Both are similar. We 'feel' the Macap has a better motor to produce a slightly better grind (by feel, not microscope). However, the Mignon grinders do look a nicer. Both can produce static under dry conditions and certain coffee blends. As for noise, we are currently uncertain as this would need to  be tested.

    8. I saw this grinder (Macap Leo 55 ) and it seems like a great value. I have three questions: 1. I noticed that the burrs are screwless and I’m wondering how they are fixed in place or changed when needed? 2. Also, the Macao marketing material isn’t very informative, but they mention some special design to improve alignment- do you know anything more? 3. Will the user need to align the burrs?
    9. 0 votes
      Q I saw this grinder (Macap Leo 55 ) and it seems like a great value. I have three questions: 1. I ...... Read more answer now
      Asked by Dustin on November 30, 2022 12:10 pm
      Answered by the admin

       I noticed that the burrs are screwless and I’m wondering how they are fixed in place or changed when needed?

      A. There are three allen key screws immediately around the bean hopper ring or holder. There are removed and the top burr is removed from the fixed position. The bottom burr is removed from removing the center nut after securing the burr sweeper lightly with a flat head screwdriver.

      2. Also, the Macao marketing material isn’t very informative, but they mention some special design to improve alignment- do you know anything more?

      A. All manufacturers provide very little information. The reasons are not to educate the competition, and in case there are any changes in the future, they do not want the liability. This is why the BIG A company allows very little info.

      3. Will the user need to align the burrs?

      A. As far as we can see, no alignment needed.

    10. Hi. Wondering if you spent any more time with the grinder and if so what your impressions are. Thanks
    11. 0 votes
      Q Hi. Wondering if you spent any more time with the grinder and if so what your impressions are. Th...... Read more answer now
      Asked by Bruce Hill on November 18, 2022 2:19 pm
      Answered by the admin

      We are liking it very much! The more we are leaning about it, the more we feel this is a great grinder!

    12. How quiet is this grinder compared to the eureka atom?
    13. 0 votes
      Q How quiet is this grinder compared to the eureka atom? answer now
      Asked by Francis Cozza on November 12, 2022 3:04 pm
      Answered by the admin Sorry, we are unsure at this time as it just arrived.