REFURBISHED Lelit PL62S-T Mara HX Espresso Machine


We have some models leftover from our last batch. The manufacturer forgot to drain the boilers. As a result, the water inside froze and affected some of the inside parts. Our technicians have refurbished each unit to good working order. If the unit arrives wet, please allow the machine to air dry 24 hours before use.



These are refurbished units with a 6 month warranty. All have been tested to be in working order and will be tested immediately before shipping..

A huge legend in a small body – Mara is placed at the prestigious end of many home espresso machine. It combines the best technology ever – the legendary E61 grouphead inside an incredibly compact, full stainless steel body. The result: a marvelous, appealing and super compact espresso machine enabling to apply barista’s golden rules and extract the most tasty espressos and cappuccinos you can dream of.

This version of the Mara comes with a built-in PID Sensor.  This helps keep a steady boiler temperature, better than a pressurstat in terms of temperature management and in terms of reliability. Although this unit does not have a user programmable PID controller interface to change the boiler temperature, the manufacturer has a preset temperature for the boiler based on years of studying the PID.


  • Polymer tubing connecting boiler to steam and hot water valves are alimentary, withstand high pressure, withstand high temperatures up to 620 °F, facilitate easier repairs, and most importantly, are limescale free.
  • Stainless steel body with a satin finish (exterior only).
  • Dual pressure gauge – Top part measures boiler pressure (0 – 4 bar). Bottom part measures pump pressure (0 – 16 bar).
  • Separate indicator lights – Left light is for power to indicate the machine is powered on. Right light is for the heating element to indicate when the heating element is energized.
  • Multi-directional, no burn steam and no burn hot water wand and 2 hole steam tip.
  • Professional grade portafilter – double spout handle – with 58 mm with Lelit logo imprinted on the filter head.
  • Adjustable over pressure valve – top cover and body panel need to be removed to adjust. We do not recommend this as the pump pressure can be regulated by the grind fineness, amount of coffee in the basket, as well as the tamping presure.
  • Water reservoir has a two stage shut off. One shut off is for when removing the reservoir. The second shut off is a magnetic float to power off the heating element when the reservoir is low on water.
  • Manual resettable safety thermostat on top of boiler – this usually occurs if the PID sensor
  • E61 grouphead – hot water circulates from the heat exchanger through the grouphead and back to keep the grouphead to keep your portafilter nice and hot.
  • 1.4 liter copper boiler, insulated on side, with heat exchanger and thermo-siphon double cycle system to have the brewing group and the boiler always hot, at the right temperature determined by the manufacturer
  • Extremely low feet to create a very low profile
  • Power plug completely removable from rear of machine – make sure it is thoroughly plugged in as a weak connection can cause a fire hazard.
  • Accessories: Instructional manual, dual spout portafilter with 2-cup basket, cheap plastic tamper, plastic scoop, and blind filter basket/insert

Additional information



Height (inches)

14.5, approximate

Width (inches)

9, approximate

Depth (inches)

16, approximate

Weight (pounds)


Wattage (watts)


Voltage (volts)


Boiler capacity (liters)


Portafilter size (mm)


Tank capacity (liters)


Country of manufacture



  • Label: The label on the box shows the SKU as PL62S/120/1STL.
  • Comparison to the PL62 version:
    • The PL62S has a plastic tamper. The PL62 has an upgraded tamper.
    • The PL62S has a 2 spout portafilter. The PL62 has a 1 spout portafilter and a 2 spout portafilter.
    • The PL62S has plastic steam / hot water knobs. The PL62 has upgraded knobs similar to the PL62T.
  • Direct water connection: The Lelit PL62T Mara is currently NOT available with a direct water connection. It can only operate with a water tank / reservoir.
  • Low water alarm: The beep of the low water alarm starts slow for about 20 seconds. In this time there is power to the heating element. After the 20 seconds the heating element is no longer powered and the beep increases the frequency.

Customer reviews

5 stars 0 0 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %


There are no reviews yet.

Be the first to review “REFURBISHED Lelit PL62S-T Mara HX Espresso Machine”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Questions and Answers - Please ask follow up questions as a new question. Thank you

    1. 0 votes

      At the time of this writing, yes it does. However, when we get down to the last few, this may change.

    2. 0 votes

      Sorry, this is not normal. We are unsure how this happened as we bench test every machine. Please tighten screw. If it still leaks, remove an add a small amount of plumbers tape to the threads near the nut.

    3. 0 votes

      Sorry, at this time, we do not ship outside the United States and its territories.

    4. 0 votes
      Q Are there visible scratches or dents? answer now
      Asked on August 7, 2019 1:20 am

      Usually, no dents. However, there can be some surface scratches. We always send out the best looking machines first.

    5. 0 votes
      Q If I pay for shipping can you sell it? answer now
      Asked on August 5, 2019 1:02 am

      Sorry, there was incorrect information on our web page. You can order online for shipping.

    6. 0 votes


      We have added different warranty options in the drop down above the Add to Cart button.

    7. 0 votes

      Sorry, pricing is for in-store pick up only at this time.

    Send me a notification for each new answer.

    You may also like…