Lelit PL043MMI Fred Stepless Doserless Espresso Coffee Grinder
The Lelit PL043MMI Fred is a similar espresso coffee grinder as the Lelit PL044MM Fred! Both have the same size conical burrs. Additionally, both have the same grinding adjustment and operation. However, the Lelit PL043MMI Fred is slightly smaller in terms of dimensions and weight, so it is truly compact for your home espresso bar!
The Lelit Fred pairs well with the Lelit Bianca V3 Dual Boiler Espresso Machine
Learn more by visiting our YouTube Channel
Grinding Adjustment
- Stepless – Infinite number of grind settings which allows you really fine tune your grind. Adjustment dial is on the right side of the grinder. Turn clockwise for a finer grind and counterclockwise for a coarser grind.
Grinding Operation
- Semi automatic – The power button is on the left side. To start grinding, push your portafilter against the grinding button above the fork. Press and hold for continuous grinding, and release to stop.
Grinding Burrs
- Conical Grinding Burrs – 38 mm in size. Spins at a low rpm which generates less heat. Heat buildup can negatively affect your coffee grinds by heating the coffee grinders before brewing.
Bean Hopper
- Low profile – The total height of the grinder with the hopper is approximately 12″.
Notes
Espresso Coffee Grinder Warnings:
- Changing grind settings: It is very important to only change grind settings when the unit is powered on and the burrs are in motion. If you do not do this, the burrs will ‘gunk’ up and render the grinder to only produce very coarse grinds or no grinds at all. To remedy this, you will have to open up the grinder to get access to the grinding burrs. This issue will be considered operator error for lack of following directions, and not be classified as a defective grinder.
- Electrical cord: For most grinders, the cord is placed between the packaging (foam or cardboard) and the underside body of the grinder. During shipping, it is normal for a bend or insignificant blemish/slice to damage the cord.
- Finding coffee grinds in a new grinder: Most manufacturers test their grinders with coffee beans before they leave their facility. Unfortunately, they are not always able to get every trace of coffee out of the grinders after testing. As a result, you may find coffee beans or grinds inside your grinder, or there may be grinds in the packaging.
- Static issues: There are static issues with all grinders, even the highest-quality models. We firmly believe that the static comes from the coffee beans. If you are having static problems with your coffee grinder, try using a different blend of beans.
- Electrical: To avoid electrical damage (which is not considered a manufacturer’s defect), please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. A surge without protection can damage a grinder at the power switch, the capacitor, the motor, or the wiring.
- Burr cleaning: For routine maintenance of the grinding burrs, we recommend using grinder cleaning agents. We do not recommend any removal of the burrs or the burr carrier for cleaning (unless necessary) as re-assembly can cause damage.
- Replacing burrs: NEVER use a flathead screwdriver and hammer to wedge under the burrs for removal. This could badly damage your grinder.
Specifications
| Brand | Lelit |
|---|---|
| Height (inches) | 12, approximate |
| Width (inches) | 7, approximate |
| Depth (inches) | 5, approximate |
| Weight (pounds) | 6, approximate |
| Wattage (watts) | 150 |
| Voltage (volts) | 120 |
| Burr size (mm), Type | 38, conical |
| Hopper capacity (grams) | 250 |
| Country of manufacture | Italy |
| Doser | No (doserless) |
| Grinding Adjustment | Stepless |
4 reviews for Lelit PL043MMI Fred Espresso Coffee Grinder