DISCONTINUED Eureka Zenith Club E Espresso Coffee Grinder

This product has been discontinued at 1st-line. Please visit one of the categories below for more comparable products.

Check out the new Eureka Zenith 65 E model.

SKU: Zenith Categories: , , ,

Eureka Zenith Club E Espresso Coffee Grinder

  • Hardened steel burrs:
    • Flat burrs measuring at 60 mm.
    • Grinding speed of 1330 rpm capable of producing approximately 12 pounds of ground coffee an hour.
  • Stepless micrometrical adjustment:
    • Infinite range in between each grind setting which allows you to really fine tune the grind for your espresso machine.
    • Adjustment knob is located on the top right of the grinder underneath the bean hopper. Turn clockwise for a finer grind and counter clockwise for a coarser grind.
  • Large bean hopper:
    • Holds approximately 2.1 pounds of roasted beans, almost the size of standard kilo bag.
    • A set screw holds the hopper in place as opposed to other grinders which are friction fit.
    • It is also equipped with a stopper if you want to remove the hopper with the beans in it, and a finger guard…just in case.
  • On-demand grinding:
    • Doserless model.
    • Grind only what you need.
  • LCD lighted display:
    • Shows the settings for both single and double dose: the grinding cycle time, the current grinding mode selection, and the dosage count for each mode.
  • Easy to use controls:
    • 3 grinding modes. Press the 1-cup button for a single dose, the 2-cup button for a double dose, or press both buttons simultaneously for a continuous dose.
    • Start the grinding cycle by pressing the button under the chute.
    • The “+” and “-” buttons control the grinding time for the current dosing selection. Select your grinding mode first, then press the “+” button to increase the time or the “-” to decrease the time.
    • Lock the grind cycle times by pressing the “+” and “-” simultaneously.
    • Reset the dose count by holding both the “+” and “-” for more than 5 seconds.
  • Hands free operation:
    • Your portafilter rests on a metal fork and a plastic flap holds your portafilter in place.
    • The fork can be adjusted to accommodate most portafilters.
    • A light above the chute illuminates your portafilter as the coffee grounds are dispensed in.
Brand

Eureka
Height (inches)

23.5, approximate
Width (inches)

9, approximate
Depth (inches)

10, approximate
Weight (pounds)

22
Wattage (watts)

510
Voltage (volts)

110 – 120
Burr size (mm), Type

65, flat
Grinding speed (RPM)

1310
Hopper capacity (grams)

950
  1. If the motor doesn't turn on, try taking the grinder to a coarser setting.
  2. As with all coffee grinders, it is very important to only change grind settings when the unit is powered on and the burrs are in motion. If you do not do this, the burrs will 'gunk' up and require cleaning by you every time this occurs. Changing the grind settings when the burrs are not in motion will render the grinder to only produce very coarse grinds or no grinds at all. If this result occurs, this will be considered operator error for lack of following directions, and not be classified as a defective grinder.
  3. This is an espresso only coffee grinder as other coffee brew methods will require the stepless knob to be turned hundreds of rotations.
  4. Please note that this model is the Zenith Club E Model. It is NOT the Zenith 65E High Speed, Zenith 65, nor the Zenith 75E High Speed - all of which are different than the Club E which we carry.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “DISCONTINUED Eureka Zenith Club E Espresso Coffee Grinder”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Ask a question

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

    There are no questions yet. Be the first to ask a question about this product.