Eureka Zenith 65E Stepless Doserless Espresso Coffee Grinder – Titanium Burrs, Short Bean Hopper

$1,099.00

Found a better offer? Let us meet or beat it!

Earn 1099 EspressoPoints worth $21.98! (Learn about EspressoPoints)

Earn 1099 EspressoPoints worth $21.98! (Learn about EspressoPoints)
Clear

Frequently Bought Together

Zenith65Echrome + Eureka Zenith Hopper Blow Up Retention System + Eureka Zenith Hopper Blow Up Retention System
Price for all three: $1,329.00

Eureka Zenith 65E Espresso Coffee Grinder - Stepless, Doserless, Titanium Burrs, Short Bean Hopper

The Eureka Zenith 65E is a top-notch espresso grinder designed for a high-volume restaurant or cafe. After all, thanks to its fast RPM of 1310, 510-watt motor, and 65mm flat titanium burrs, you will be producing the perfect grinds in a fast amount of time! However, if you have substantial cabinet space in your home espresso bar, then you can be an AMAZING home professional barista with this grinder! Generally, Eureka has an excellent reputation in designing technologically innovative equipment to give you the best commercial feel in terms of design and reliability. Thus, learn more about the Eureka Zenith 65E and consider this beauty today!

Grinding burrs

  • Flat grinding burrs – Large size at 65 mm. The larger the size, the more of a grinding surface, resulting in faster production. The burrs are made of a long-lasting TITANIUM.
  • High rpm – Fast spinning rate at 1310 rpm. The higher the speed, the faster the production, which can increase efficiency and reduce wait times. Espresso grinding is approximately 2.7 – 3.7 grams / second, but depends on beans, voltage, and grind fineness.

Grinding adjustment

  • Stepless – Gives you an “infinite” range of settings that allow you to really fine-tune your grind to your espresso machine. Turn clockwise for a finer grind and counterclockwise for a coarser grind.
  • Perfect positioning – The adjustment knob is located on the top right of the grinder, underneath the bean hopper. This helps keep the overall width of the Zenith 65E  low compared to other grinders that have it on the side. This also protects it from hitting against other equipment.

Portafilter fork

  • Portafilter fork – Used mainly for espresso grinding. There is a built-in lip that helps hold most portafilters in place. The fork can be raised up and down by loosening the holding screw with the included Allen key. Once the fork is in the right position, then you can tighten the fastening screw. The fork is greatly designed for any filterholder out there.

Bean hopper

  • Large – The hopper holds approximately 3.1 lbs. of whole coffee beans.
  • Rubber neck guard – The bean hopper sits comfortably on top of the grinder. There is a rubber neck guard that helps protect the neck of the bean hopper from cracking.
  • Finger guard – prevents users from “accidentally” putting their fingers in the grinding burrs.
  • Set screw – Secures the hopper to the grinder. Prevents users from quickly removing the hopper, spilling beans everywhere.

Electronic controls

  • Color display – When semi-automatic dosing, the display switches to a picture of a grinding burr with a timer in the center. It will count up by 0.1 second increments until you stop. When electronic dosing, the screen will highlight whether you select “1-cup” or “2-cup”. The timer will count down when you start the grinding cycle.
  • Time-based grinding – For single and double shots. The “1-cup” mode can adjust from 0.5 seconds to 25 seconds. The “2-cup” mode can adjust from 0.5 seconds to 35 seconds. You can adjust the time by 0.1 second increments. The semi-automatic mode tracks the time from start to stop.

Learn more about our other Eureka espresso coffee grinders on its brand page!

Brand

Eureka

Depth (inches)

10, approximate

Width (inches)

9, approximate

Height (inches)

17.6, approximate

Weight (pounds)

26, approximate

Wattage (watts)

510

Voltage (volts)

110 – 120

Burr size (mm), Type

65, flat

Grinding speed (RPM)

1310

Country of manufacture

Italy

Doser

No (doserless)

Grinding Adjustment

Stepless

Operation

Electronic

Hopper capacity (grams)

1400

Espresso Grinder Warning

  • CLEANING WARNING: We recommend using grinder cleaning agents. We do not recommend any removal of the burrs or burr carrier for cleaning as re-assembly can cause damage.
  • ELECTRICAL WARNING: To avoid electrical damage to this espresso grinder which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. The lack of the recommended surge suppressor, the espresso grinder can be damaged at the power switch, the capacitor, the motor, or the wiring.

  1. The hole at the bottom of the bean hopper does NOT closely align with the holding screw.
  2. The bean stop flapper is difficult to keep in an open position.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “Eureka Zenith 65E Stepless Doserless Espresso Coffee Grinder – Titanium Burrs, Short Bean Hopper”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

      What is the height of the Zenith with this short bean hopper?
    1. 1 vote
      Q What is the height of the Zenith with this short bean hopper? answer now
      Asked by jm on November 2, 2020 8:19 pm
      Answered by the admin

      Hi,

      We measured the height to be ~15.75 inches.

      Answered by the admin

      Hi,

      Another one of our reps measured the height and they found it to be actually ~17.6".  We apologize for the error.

    Send me a notification for each new answer.