Picture of Eureka Olympus 75E Espresso Coffee Grinder - Stepless, Doserless, Titanium Burrs

Eureka Olympus 75E High Speed Espresso Coffee Grinder – Stepless, Doserless, Titanium Burrs

$1,499.00

Earn 1499 EspressoPoints worth $29.98! (Learn about EspressoPoints)
Earn 1499 EspressoPoints worth $29.98! (Learn about EspressoPoints)
SKU: Olympus75E Categories: , , , , , Tags: ,

Eureka High Speed Olympus 75E Espresso Coffee Grinder with Stepless Adjustment, Doserless Chute, and Loger Lasting Titanium Burrs

The Eureka Olympus 75E delivers espresso doses at lightning speed as if the Olympian God Zeus was working this grinder! If you are looking for a grinder for a busy restaurant or cafe and will be making A LOT of espresso at once, then the Eureka Olympus will be great for your need!

After all, with 75mm flat titanium burrs, an 800-watt motor, grinding speed of 1700 RPM, you will be making fast and consistent grinds in no time! Additionally, make sure you have room on that counter space because the Eureka Olympus 75E measures a whopping 19.5 inches tall! Overall, Eureka is known to design technologically innovative espresso grinders to give you the best commercial feel in terms of design and reliability, so learn more about the Eureka Olympus 75E and consider this beauty today!

Picture of Stepless Adjustment

Grinding adjustment

  • Stepless – Gives you an “infinite” range of settings that allow you to really fine-tune your grind to your espresso machine. Turn clockwise for a finer grind and counterclockwise for a coarser grind.
  • Perfect positioning – The adjustment knob is located on the top right of the grinder, underneath the bean hopper. This helps keep the overall width of the Olympus 75E  low compared to other grinders that have it on the side. This also protects it from hitting against other equipment.
OLYMPUS75E-BeanHopper

Bean hopper

  • Short – The short hopper holds approximately 1 lbs. of whole coffee beans and keeps the height down to 19 1/4″.
  • Finger guard – prevents users from “accidentally” putting their fingers in the grinding burrs.
  • Set screw – Secures the hopper to the grinder. Prevents users from quickly removing the hopper, spilling beans everywhere.
Picture of OLYMPUS75E Electronic Controls

Electronic controls

  • Color display – When semi-automatic dosing, the display switches to a picture of a grinding burr with a timer in the center. It will count up by 0.1-second increments until you stop. When electronic dosing, the screen will highlight whether you select “1-cup” or “2-cup”. The timer will count down when you start the grinding cycle.
  • Time-based grinding – For single and double shots. The “1-cup” mode can adjust from 0.5 seconds to 25 seconds. The “2-cup” mode can adjust from 0.5 seconds to 35 seconds. You can adjust the time by 0.1-second increments. The semi-automatic mode tracks the time from start to stop.
  • Rotative Power Switch – This espresso grinder is turned on or off from the rotative power switch on the right side of the grinder. Also, there is an indicator light that illuminates when powered on.
Picture of OLYMPUS75E Portafilter Fork

Portafilter fork

  • Portafilter fork – Used mainly for espresso grinding. There is a built-in lip that helps hold most spouted and most bottomless portafilters in place. We have tested E61 58mm portafilters, but smaller diamters 53mm or less may not work as well. The fork can be raised up and down by loosening the holding screw with the included Allen key. Once the fork is in the right position, then you can tighten the fastening screw. (Portafilter Not Included).
  • Lighted Spout – The spout area has lights so the grind quality can be seen better when grinding

Grinding burrs

  • Flat grinding burrs – Large size at 75 mm. The larger the size, the more of a grinding surface, resulting in faster production. The burrs are made of a long-lasting TITANIUM.
  • High rpm – Fast spinning rate at 1700 rpm. The higher the speed, the faster the production, which can increase efficiency and reduce wait times. Espresso grinding is approximately 4.5 – 5.5 grams / second, but depends on beans, voltage, and grind fineness.

Learn more about our other Eureka espresso coffee grinders on its brand page!

Brand

Eureka
Depth (inches)

11, approximate
Width (inches)

9.5, approximate
Height (inches)

19.5, approximate
Weight (pounds)

28, approximate
Wattage (watts)

800
Voltage (volts)

110 – 120
Burr size (mm), Type

75, flat
Grinding speed (RPM)

1700
Country of manufacture

Italy
Doser

No (doserless)
Grinding Adjustment

Stepless
Operation

Electronic

Espresso Grinder Warning

  • CLEANING WARNING: We recommend using grinder cleaning agents. We do not recommend any removal of the burrs or burr carrier for cleaning as re-assembly can cause damage.
  • ELECTRICAL WARNING: To avoid electrical damage to this espresso grinder which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. The lack of the recommended surge suppressor, the espresso grinder can be damaged at the power switch, the capacitor, the motor, or the wiring.

  1. The hole at the bottom of the bean hopper does NOT closely align with the holding screw.
  2. The bean stop flapper is difficult to keep in an open position.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “Eureka Olympus 75E High Speed Espresso Coffee Grinder – Stepless, Doserless, Titanium Burrs”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

      Hi, do you guys know where you can get a parts diagram and any spare parts of this specific model (Olympus 75E on demand grinder) and if so do you have a link (you don’t appear to have this one on your support pages yet). Unfortunately the Double Shot button and the “+” button on my machine are becoming a little temperamental and often when you press them it doesn’t always register, so you end up pressing it twice (or multiple times). Not sure if there could be some dirt on the contacts or if I’d need replacement parts but surprisingly (for a commercial grade machine) I can’t seem to find details anywhere, including Eureka 1920’s website, so I came to you guys as you’re great at keeping this sort of information. Any ideas? Thanks Steve
    1. 0 votes
      Q Hi, do you guys know where you can get a parts diagram and any spare parts of this specific model...... Read more answer now
      Asked by Steve Dixon on May 18, 2022 6:12 pm
      Answered by the admin

      It is best to contact Eureka directly.
      2. Does the Eureka Olympus 75E grinders you have in stock have the little (red) push button on switch on the right near the very bottom - next to the time adjuster knob -- I think this might have been added to later models
    2. 0 votes
      Q Does the Eureka Olympus 75E grinders you have in stock have the little (red) push button on switc...... Read more answer now
      Asked by Joel on August 16, 2021 11:37 am
      Answered by the admin Our current stock has the red light. However, this is NOT a push button.
      3. One question I forgot to ask re the Eureka Olympus 75E grinder -- does it have the little push button on switch on the right near the very bottom - next to the adjuster knob -- I think this might have been added to later models...
    3. 0 votes
      Q One question I forgot to ask re the Eureka Olympus 75E grinder -- does it have the little push bu...... Read more answer now
      Asked by Joel on August 10, 2021 11:44 am
      Answered by the admin Our current stock has a red light, not a switch or push button.
      4. RE: Eureka Olympus 75E High Speed Espresso Coffee Grinder – Stepless, Doserless, Titanium Burrs $xxxxx (price removed as it can change in the future) -- is this correct that it has the Titanium Burrs? Most of them come with the steel burrs - are these aftermarket and is the listing correct? Thanks
    4. 0 votes
      Q RE: Eureka Olympus 75E High Speed Espresso Coffee Grinder – Stepless, Doserless, Titanium Burrs $...... Read more answer now
      Asked by Joel on August 9, 2021 11:44 am
      Answered by the admin We order these grinders with the Titanium Burrs directly from Eureka. We believe that a great grinder at this price should have these better burrs.

    Send me a notification for each new answer.