ECM Technika V Profi Espresso Machine – PID, HX
Heat exchange system:
- Stainless steel, insulated – The boiler is made of stainless steel which is less susceptible to limescale. Typically stainless steel boilers do not retain their heat as well as copper or brass boilers. This machine compensates for that by being wrapped with insulation.
- Pull a shot & steam milk at the same time – Steam is always readily available. Therefore there is no wait time going from coffee to steam mode.
LARGER Separate pressure gauges (compared to the previous non-PID version):
- Steam pressure gauge – Located on the left. Measures from 0 to 3 bar. Optimal pressure is between 0.8 and 1.1.
- Brew pressure gauge – Located on the right. Measures from 0 to 16 bar. Optimal pressure is between 8 and 10.
E-61 grouphead:
- Constantly heated – Hot water circulates from the heat exchanger through the grouphead and back to keep the grouphead and your portafilter nice and hot. This keeps the grouphead at a constant, stable temperature compared to other groupheads that have a built-in heating element.
- Pre-infusion – The lever next to the grouphead activates a microswitch which turns on the pump to pump water through the coffee grinds. When you pull the lever halfway up, it will open the valve to allow water into the grouphead without activating the pump. Please note that true pre-infusion requires the direct water connection whereby the water pressure from the waterline creates true pre-infusion.
Rotary vane pump:
- Quiet operation – Rotary pumps are necessary for direct connect capable machines since vibration pumps cannot handle the incoming water pressure. The main benefit that you will experience is that they are a lot quieter.
- Adjustable Rotary Pump Pressure – No need to remove the body panel to access. The adjustment screw is accessible underneath the machine.
Switchable from the water tank to direct water connection:
- Easy transition – After hooking up the water line (included) to your machine, all you need to do is activate the switch located behind the drip tray on the left side. Turn to the “1” position.
Steam & hot water wands:
- Joystick lever handles – Easily pull in any direction for quick activation. Both joysticks will lock in any position for hands-free operation.
- Multi-directional – Allows for more movement and flexibility.
- “No burn” – Both wands are insulated to allow you to touch anywhere on the arm. Please note that after very long periods of steaming or pouring hot water, the arm will be too hot to touch. We recommend to only touch the rubber grips on each wand.
- 2-hole steam tip – Allows for a slow gradual build-up of microfoam.
Accessories included with the ECM Technika PID Profi V Espresso Machine:
- Portafilters – Single spout portafilter and a dual spout portafilter. Both handles match the style of the grouphead lever and are ergonomically designed with an angle for an easier operation to lock into the grouphead.
- Filter baskets – 1-cup filter basket which holds approximately 7 grams. 2-cup filter basket which holds approximately 14 grams. Blind filter basket which you can use for backflushing. All basket is 58 mm in diameter.
- Tamper – A cheap plastic tamper, common for most espresso machines to keep the overall selling price of the machine low. We recommend upgrading to a better tamper.
- Cleaning brush – Used for cleaning the grouphead. Ergonomically designed with an angle for easier usage. The neck has special ridges to keep hot water from dripping to your hand.
- Hose – Stainless steel braided. For connecting to a water line.
- Instruction manual – Written in both German and English. The instructions also work for the Technika.
For more ECM Manufacture products, please visit our ECM Manufacture brands page. If you have any questions, please reference the Q&A tab on each product page.
2 reviews for ECM Technika V Profi HX Espresso Machine