DISCONTINUED Ascaso I-2D Doser Conical Burr Stepless Espresso Coffee Grinder

$0.00

This product has been discontinued at 1st-line. Please visit one of the categories below for more comparable products.

Ascaso I-2D Doser Conical Burr Stepless Espresso Coffee Grinder

Ascaso has developed 4 professional versions and designs of this grinder: combination of flat burrs or conical burrs, doser or doserless. Choose the most convenient option according to your grinding requirements. Moreover, all grinders include the MRS (Micrometic Regulation System). This enables to adjust your grinding setting from zero to infinite depending on the type of coffee you wish to make: espresso, long black coffee, french press, Turkish coffee, etc. This is the Ascaso I-2D Doser Conical Burr version.

WARNING: Due to portafilter design, shape, and/or sizing, the following espresso machines and equipment brands are not compatible with this grinder:

All Gaggia, All Krups, All Delonghi, All Braun, All Mr. Coffee,  All Cuisinart and Elektra (Microcasa A Leva only)

Professional blades

Plastic grinding group and a conical (cone shaped) grinding wheel (conical steel burrs).

Unbreakble coffee bean hopper

Made of clear shatter resistant plastic and topped with a plastic lid. There is no need to constantly refill the grinder. It will hold enough beans to brew approximately 90 shots of espresso.

Micrometric Regulation System (MRS)

AKA stepless adjustment. Controls the quality and consistency of the grinds. Allows for unmatched, precise adjustments to the grind setting, which is critical for espresso grinding.

Doser

Features a container that stores the coffee as it is ground from the grinding chamber and can be dosed out as needed.

High quality of the materials and components

Made of aluminium.

Removable tray

Easy cleaning and maintenance.

Easy to clean

One important and often overlooked task required of owning a good coffee grinder is routine cleaning. To clean, just remove the coffee bean hopper and cover to expose the grinding chamber. All their components are designed for a great durability and low maintenance.


For more Ascaso products, please visit our Ascaso brands page. If you have any questions, please reference the Q&A tab on each product page.
Brand

Ascaso

Height (inches)

16.5, approximate

Width (inches)

6.5, approximate

Depth (inches)

10.5, approximate

Weight (pounds)

11

Wattage (watts)

175

Voltage (volts)

110 – 120

Burr size (mm), Type

38, conical

Grinding speed (RPM)

1200

Hopper capacity (grams)

600

Doser/Container capacity (grams)

125

Country of manufacture

Barcelona, Spain

  1. The instructional manuals for Ascaso are printed for worldwide distribution and covers almost every model produced worldwide. With this in mind, there may be features, accessories, or colors available in Ascaso equipment in other countries, but not available in our models produced for the United States.
  2. The Ascaso espresso coffee grinder is mainly suited for grinding for espresso only. We will not accept returns if you purchase this grinder for other coffee brewing methods. It can take between 3-5 minutes to turn the stepless adjustment knob to change settings from french press to espresso grind. We will not accept a return under our return policy if this grinder was used to grind other types of food products (i.e. spices, paper, etc) as some previous customers have tried to do.
  3. The doser cannot be removed on doser versions.
  4. Power of machine is turned off by a manual switch (not timer).
  5. The bean hopper requires a little force and shimmying to get the aforementioned height. If the user only places the bean hopper into the grinding chamber without pushing, the unit height will be up to 17".
  6. A lower profile bean hopper: (SKU: MI110) is available for this grinder. The height would lowered by approximately 1.5 inches. Please note the low profile bean hopper is only available as an option as we can not switch out original parts.

  1. Changing grind settings: As with all coffee grinders, it is very important to only change grind settings when the unit is powered ‘on’ and the burrs are in motion. If you do not do this, the burrs will ‘gunk’ up and require cleaning by you every time this occurs. Changing the grind settings when the burrs are not in motion will render the grinder to only produce very coarse grinds or no grinds at all. If this result occurs, this will be considered operator error for lack of following directions, and not be classified as a defective grinder.
  2. Finding coffee grinds in a new grinder: We have confirmed that the manufacturer tests EVERY grinder with coffee beans before it leaves their facility, but they are not always able to get every trace of coffee out of the grinders after testing. As a result, you may find coffee beans or grinds inside your grinder, or there may be grinds in the packaging when you unwrap it.
  3. Static issues: There are static issues with all grinders, even the highest quality models. We firmly believe that the static comes from the coffee beans. If you are having static problems with your coffee grinder, trying using a different blend of beans.
  4. Replacing burrs: NEVER use a flat head screwdriver and hammer to wedge under the burrs for removal. This could badly damage your grinder.
  5. Electrical cord: Please note that the electrical cord is placed between the packaging (foam or cardboard) and the underside body of the grinder. During shipping, it is normal for a bend or insignificant blemish / slice to damage the cord.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “DISCONTINUED Ascaso I-2D Doser Conical Burr Stepless Espresso Coffee Grinder”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Ask a question

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

      Do you sell a smaller hopper that will fit on this grinder?
    1. 0 votes
      Q Do you sell a smaller hopper that will fit on this grinder? answer now
      Asked by Daphna on January 22, 2019 4:30 pm
      Answered by the admin The MI.110 hopper that are on the Ascaso I-Mini & I-Steel grinders will fit the I-1 & I-2 grinders. It will bring the overall height down to ~14."