DISCONTINUED Anfim CODY On Demand Commercial Espresso Coffee Grinder

This product has been discontinued at 1st-line. Please visit one of the categories below for more comparable products.

.

Anfim CODY On Demand Commercial Espresso Coffee Grinder

  • Stepless grinding adjustment.
  • Hopper slide.
  • Overload protection.
  • Automatic START/STOP switch.
  • Electronic shot counter.
  • Multifunction control display & control unit.
  • Electronic shot timer for single & double shot.
  • 64 mm flat grinding burrs.
Brand

Anfim

Height (inches)

17.5, approximate

Width (inches)

8, approximate

Depth (inches)

15, approximate

Weight (pounds)

33

Wattage (watts)

450

Voltage (volts)

110 – 120

Burr size (mm), Type

64, flat

Grinding speed (RPM)

960

Hopper capacity (grams)

450

Approvals

CSA, UL

  1. This product will be drop shipped from the manufacturer.
  2. Manual switch models: These models are no longer being produced by the factory.

  1. Changing grind settings: As with all coffee grinders, it is very important to only change grind settings when the unit is powered ‘on’ and the burrs are in motion. If you do not do this, the burrs will ‘gunk’ up and require cleaning by you every time this occurs. Changing the grind settings when the burrs are not in motion will render the grinder to only produce very coarse grinds or no grinds at all. If this result occurs, this will be considered operator error for lack of following directions, and not be classified as a defective grinder.
  2. Finding coffee grinds in a new grinder: We have confirmed that the manufacturer tests EVERY grinder with coffee beans before it leaves their facility, but they are not always able to get every trace of coffee out of the grinders after testing. As a result, you may find coffee beans or grinds inside your grinder, or there may be grinds in the packaging when you unwrap it.
  3. Static issues: There are static issues with all grinders, even the highest quality models. We firmly believe that the static comes from the coffee beans. If you are having static problems with your coffee grinder, trying using a different blend of beans.
  4. Replacing burrs: NEVER use a flat head screwdriver and hammer to wedge under the burrs for removal. This could badly damage your grinder.
  5. Electrical cord: Please note that the electrical cord is placed between the packaging (foam or cardboard) and the underside body of the grinder. During shipping, it is normal for a bend or insignificant blemish / slice to damage the cord.

Espresso Grinder Warning

  • CLEANING WARNING: We recommend using grinder cleaning agents. We do not recommend any removal of the burrs or burr carrier for cleaning as re-assembly can cause damage.
  • ELECTRICAL WARNING: To avoid electrical damage to this espresso grinder which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. The lack of the recommended surge suppressor, the espresso grinder can be damaged at the power switch, the capacitor, the motor, or the wiring.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “DISCONTINUED Anfim CODY On Demand Commercial Espresso Coffee Grinder”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Ask a question

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

      Does the specification for height include the bean hopper?
    1. 0 votes
      Q Does the specification for height include the bean hopper? answer now
      Asked by Richard Hedstrom on September 5, 2020 1:08 pm
      Answered by the admin Yes.
    2. Hi, we have a ANFIM Cody 110-W-ST-UL matr. 37418 since 2017. The display recently went blank and the automatic button (silver) does not work. We have to use the manual (black) button. Would you have instructions to reset the machine? Thanks
    3. 0 votes
      Q Hi, we have a ANFIM Cody 110-W-ST-UL matr. 37418 since 2017. The display recently went blank and ...... Read more answer now
      Asked by Gilles Laverdure on June 1, 2020 1:59 pm
      Answered by the admin

      This is a fuse issue, not a reset issue. Since there is no record of your purchase from us, we suggest you contact your selling dealer for the fuse.

    4. Is this in stock? How long to get to 08008? Thankyou
    5. 0 votes
      Q Is this in stock? How long to get to 08008? Thankyou answer now
      Asked by Lori on June 11, 2019 6:59 pm
      Answered by the admin

      At this time, this grinder is available for immediate shipping.