DISCONTINUED – Mahlkonig VTA 6 S Retail Shop Coffee Grinder

Request a price match.
This product has been discontinued at 1st-line. Please visit one of the categories below for more comparable products.

Mahlkonig VTA 6 S Retail Shop Coffee Grinder

The Mahlkonig VTA is the ultimate table top coffee grinder.

The Mahlkönig top model is the genuine design classic of the coffee grinders. Some people call this machine: R2D2. We call it a workhorses! Yes, plural! This fantastic coffee grinder works like multiple horses pulling a wagon! Full of beans, too!

Naturally, it impresses many coffee afficionados with its unique high capacity and its modern technology: 10 seconds per pound! It not only grinds unusually fast, evenly fine and pleasant cool – it also works also very quiet compared to other grinders. The effective shaker device and the bag holder with integrated switch and built-in cleaner for residual coffee provide simple easy handling for even all staff at hand.

The Mahlkonig VTA6S retail in a bag coffee grinder incorporates Mahlkönig’s whole experience and tradition in building super high quality and high performance industrial coffee grinders.

Featrures:

  • Leveling Device Distributes Grinds Evenly.
  • UNIQUE Clean Out Device Ensures ALL Grounds are Dispensed.
  • Reduces Customer Waiting Time and Improves Customer Service.
  • Re-sharpenable European Burrs.
  • Stylish, upscale european design.
  • Colors: Gold, Silver, or Copper (are subject to availability and please specify when ordering).
  • Quality made in Germany.
  • Bag clamping to hold the retail bag.
  • Hopper magnet for any metals mixed in with coffee beans and finger protection guard for those dummies who think they can stick their finger inside the grinding chamber.
  • Motor and electrical overload protection to save the motor from overuse and abusive electrical power
  • Easy Spout cleaning.
  • 13 grind settings for all sorts of coffee grinding
  • UL/ETL/CSA/NSF Listed.

Specifications:

VTA 6 S

Grinder Speed

6.5 lbs/min

Voltage, Amps

208 V(3-phase), 9.3 amp

Hopper Capacity

2.2 lbs

Dimensions

24.6″ H x 14.4″ W x 14.8″ D

Net Weight

93 lbs

Shipping Weight

109 lbs

Notes:

  1. This item will be drop shipped from the manufacturer.
  2. Please note that that you will find coffee grinds in these grinders when delivered as they are all tested by the manufacturer. They try to clean them as best as possible, but they can not remove all grinds and those remaining grinds do become loose and spread during shipping.
  3. Please note that the manufacturer will produce different colors of this grinder. They do not notify any retailers in advance to which color will be imported. Therefore, the color of the grinder shown is for illustrative purposes, and the grinder ordered and shipped will most likely be different than shown. This applies to all resellers in the USA for this manufacturer.
  4. Please note that the electrical cord is placed between the packaging (foam or cardboard) and the underside body of the grinder. During shipping, it is normal for a bend or insignificant blemish/slice to damage the cord.
Brand

Mahlkonig

Espresso Grinder Warning

  • CLEANING WARNING: We recommend using grinder cleaning agents. We do not recommend any removal of the burrs or burr carrier for cleaning as re-assembly can cause damage.
  • ELECTRICAL WARNING: To avoid electrical damage to this espresso grinder which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. The lack of the recommended surge suppressor, the espresso grinder can be damaged at the power switch, the capacitor, the motor, or the wiring.

  1. Changing grind settings: As with all coffee grinders, it is very important to only change grind settings when the unit is powered ‘on’ and the burrs are in motion. If you do not do this, the burrs will ‘gunk’ up and require cleaning by you every time this occurs. Changing the grind settings when the burrs are not in motion will render the grinder to only produce very coarse grinds or no grinds at all. If this result occurs, this will be considered operator error for lack of following directions, and not be classified as a defective grinder.
  2. Finding coffee grinds in a new grinder: We have confirmed that the manufacturer tests EVERY grinder with coffee beans before it leaves their facility, but they are not always able to get every trace of coffee out of the grinders after testing. As a result, you may find coffee beans or grinds inside your grinder, or there may be grinds in the packaging when you unwrap it.
  3. Static issues: There are static issues with all grinders, even the highest quality models. We firmly believe that the static comes from the coffee beans. If you are having static problems with your coffee grinder, trying using a different blend of beans.
  4. Replacing burrs: NEVER use a flat head screwdriver and hammer to wedge under the burrs for removal. This could badly damage your grinder.
  5. Electrical cord: Please note that the electrical cord is placed between the packaging (foam or cardboard) and the underside body of the grinder. During shipping, it is normal for a bend or insignificant blemish / slice to damage the cord.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “DISCONTINUED – Mahlkonig VTA 6 S Retail Shop Coffee Grinder”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Ask a question

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

      dear Sir, I am located in Lima Peru, I want to buy the VTA 6 S, my question are: 1. is possible to ask for with 220 V(3-phase), 9.3 amp? 2. the VTA 6 S has the same cost of VTA 6 SW? 3. Where are you located to do a purchase in US?
    1. 0 votes
      Q dear Sir, I am located in Lima Peru, I want to buy the VTA 6 S, my question are: 1. is possible ...... Read more answer now
      Asked by Eduardo Talavera on December 27, 2018 3:51 pm
      Answered by the admin

      Sorry, we do not export and we only have the voltages shown.