DISCONTINUED – Mahlkonig K30 Twin Commercial Coffee Espresso Grinder

Request a price match.
This product has been discontinued at 1st-line. Please visit one of the categories below for more comparable products.

Mahlkonig K30 Twin Commercial Coffee Espresso Grinder

Mahlkonig K30 Features:

  • Grind-on-Demand: Freshly ground portion grinding with no loss of aroma or coffee.
  • Portioning: Electronically controlled (timer) and variable programming. Moreover, there is single and double shot preselection. Grinding time is approx. 2 seconds for a single espresso of 7 grams. Shot counter.
  • Operation: First, the grinder starts automatically when inserting the portafilter. Hands-free operation. Parallel operation of both grinders. Stepless grind adjustment. Electronic shot counters. Fan for each grinder. Software menu in five languages. Alarm signaling and saving. PIN-protected area for settings and services.
  • Design: Modular built-up. Illuminated operating display. Different colors and branding on request. Space-saving approx. 30% compared to two conventional grinders. Easy cleaning. Separate hoppers of 750 g each. Static tamper.

Specifications:

  • Measurements: 22 H x 14.6″ W x 11.8″ D.
  • Weight: 57.3 pounds.
  • Power: 850 watts, 110-120 volts, 60 hertz, 4.7 amps.
  • Grinding speed: 1640 rpm.
  • Grinding diameter: 2 x 2.56″.
  • Hopper capacity: 2 x 1.87 pounds.
  • Grinding capacity: 2 x ~3.6-4.8 grams per second.

Notes:

  1. The Mahlkonig K30 will be drop-shipped from the manufacturer.
  2. You will find coffee grinds in these grinders when delivered as they are all tested by the manufacturer. Thus, they try to clean them as best as possible, but they can not remove all grinds and those remaining grinds do become loose and spread during shipping.
  3. Please note that the manufacturer will produce different colors of this grinder. Therefore, they do not notify any retailers in advance to which color will be imported. Conclusively, the color of the grinder shown is for illustrative purposes, and the grinder ordered and shipped will most likely be different than shown. This applies to all resellers in the USA for this manufacturer.
  4. Please note that the electrical cord is placed between the packaging (foam or cardboard) and the underside body of the grinder. During shipping, it is normal for a bend or insignificant blemish/slice to damage the cord.

 

Finally, are you actually looking into getting a higher-end coffee grinder? Then learn more about the Mahlkonig DK 15 Industrial Coffee Grinder!

Brand

Mahlkonig

Espresso Grinder Warning

  • CLEANING WARNING: We recommend using grinder cleaning agents. We do not recommend any removal of the burrs or burr carrier for cleaning as re-assembly can cause damage.
  • ELECTRICAL WARNING: To avoid electrical damage to this espresso grinder which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. The lack of the recommended surge suppressor, the espresso grinder can be damaged at the power switch, the capacitor, the motor, or the wiring.

  1. Changing grind settings: As with all coffee grinders, it is very important to only change grind settings when the unit is powered ‘on’ and the burrs are in motion. If you do not do this, the burrs will ‘gunk’ up and require cleaning by you every time this occurs. Changing the grind settings when the burrs are not in motion will render the grinder to only produce very coarse grinds or no grinds at all. If this result occurs, this will be considered operator error for lack of following directions, and not be classified as a defective grinder.
  2. Finding coffee grinds in a new grinder: We have confirmed that the manufacturer tests EVERY grinder with coffee beans before it leaves their facility, but they are not always able to get every trace of coffee out of the grinders after testing. As a result, you may find coffee beans or grinds inside your grinder, or there may be grinds in the packaging when you unwrap it.
  3. Static issues: There are static issues with all grinders, even the highest quality models. We firmly believe that the static comes from the coffee beans. If you are having static problems with your coffee grinder, trying using a different blend of beans.
  4. Replacing burrs: NEVER use a flat head screwdriver and hammer to wedge under the burrs for removal. This could badly damage your grinder.
  5. Electrical cord: Please note that the electrical cord is placed between the packaging (foam or cardboard) and the underside body of the grinder. During shipping, it is normal for a bend or insignificant blemish / slice to damage the cord.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “DISCONTINUED – Mahlkonig K30 Twin Commercial Coffee Espresso Grinder”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Ask a question

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

    There are no questions yet. Be the first to ask a question about this product.