DISCONTINUED Elektra Nino Instant Commercial Espresso Grinder – polished aluminum

This product has been discontinued at 1st-line. Please visit one of the categories below for more comparable products.

.

Overview:

The Nino, Elektra’s doserless grinder, is the result of six decades of innovative research, experience, and quality production at Elektra Srl, a world class leader in the manufacturing of superior quality espresso machines and espresso coffee grinders.
Elektra’s vast experience has enabled them to develop the Nino project which primarily focused on the achievement of excellence in superfast espresso coffee grinders.
Features:
  • The Nino commercial espresso grinder provides perfect doserless grinding with Elektra’s exclusive conical mills that have a diameter of 68 mm and a thickness of 25 mm. Every barista will find precise and constant particle size as well as fantastic dosing control.
  • There is also an air-cooled low revolution motor (~500 rpm) which prevents overheating and expectedly does not transmit heat to the grinder body.
  • The patented, built-in coffee tamper is installed to swing over the portafilter on the dosing platform, which provides a flat surface to obtain an optimal tamping of the ground coffee. The built-in coffee tamper can be positioned on either side of the dosing chute. The ultimate result is that the espresso coffee in the cup has a more intense aroma and a superior taste which is free from any burnt aftertaste (unless the coffee roast is attributable to this).
  • Single or double doses are dispensed automatically by pressing either of the two selection buttons on the top front panel.
  • The grinding time is programmable in 1/10th of a second increments.
  • Precise stepless micrometric adjustment of the grind particle size.
  • This unit is supplied with a European 220 volt plug which works with most basic 110 volt to 220 volt converters (not adapter).
Brand

Elektra

Height (inches)

27.5, approximate

Width (inches)

11.5, approximate

Depth (inches)

18, approximate

Weight (pounds)

62

Wattage (watts)

270

Voltage (volts)

230-240

Burr size (mm), Type

68, conical

Grinding speed (RPM)

500

Espresso Grinder Warning

  • CLEANING WARNING: We recommend using grinder cleaning agents. We do not recommend any removal of the burrs or burr carrier for cleaning as re-assembly can cause damage.
  • ELECTRICAL WARNING: To avoid electrical damage to this espresso grinder which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. The lack of the recommended surge suppressor, the espresso grinder can be damaged at the power switch, the capacitor, the motor, or the wiring.

  1. Manual switch models: These models are no longer being produced by the factory.

  1. Changing grind settings: As with all coffee grinders, it is very important to only change grind settings when the unit is powered ‘on’ and the burrs are in motion. If you do not do this, the burrs will ‘gunk’ up and require cleaning by you every time this occurs. Changing the grind settings when the burrs are not in motion will render the grinder to only produce very coarse grinds or no grinds at all. If this result occurs, this will be considered operator error for lack of following directions, and not be classified as a defective grinder.
  2. Finding coffee grinds in a new grinder: We have confirmed that the manufacturer tests EVERY grinder with coffee beans before it leaves their facility, but they are not always able to get every trace of coffee out of the grinders after testing. As a result, you may find coffee beans or grinds inside your grinder, or there may be grinds in the packaging when you unwrap it.
  3. Static issues: There are static issues with all grinders, even the highest quality models. We firmly believe that the static comes from the coffee beans. If you are having static problems with your coffee grinder, trying using a different blend of beans.
  4. Replacing burrs: NEVER use a flat head screwdriver and hammer to wedge under the burrs for removal. This could badly damage your grinder.
  5. Electrical cord: Please note that the electrical cord is placed between the packaging (foam or cardboard) and the underside body of the grinder. During shipping, it is normal for a bend or insignificant blemish / slice to damage the cord.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “DISCONTINUED Elektra Nino Instant Commercial Espresso Grinder – polished aluminum”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Ask a question

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

    There are no questions yet. Be the first to ask a question about this product.