Bezzera BZ07 Commercial Espresso Machine - semi-automatic, tank, PID

The Bezzera now with PID temperature control on heat exchanger boiler.

This beautiful and compact stainless steel espresso machine can be a fine addition to any home! There are many benefits and a solid performance that can be found from the following features on this espresso machines:

This machine is classified as a semi-automatic whereby the operator of the machine presses the coffee button to start the espresso extraction and depresses the same button to stop the espresso extraction.

• Multi-directional steam and how water wands.
• Lever-type, spring-loaded steam and how water valves.
• Thermostat-controlled heated 58mm grouphead.
• All stainless steel body polished to a mirror finish.
• Removable three (3) liter water reservoir.
• Low water level switch turns off power when reservoir water level gets to low.
• Vibration pump installed with air release valve.
• Overpressure valve (OPV) adjustable to change exiting overpressure created by pump.
• Circuitry for automatic refill of internal boiler from water reservoir.
• Three (3) way solenoid valve for quick removal of portafilter after espresso extraction.
• Accessories: dual spout portafilter, 2-cup filter basket, 1-cup filter basket, plastic tamper, grouphead cleaning brush, and blind filter basket.

• Measurements: 14.75" H x 9.5" W x 16.75" D (37.5 cm H x 25 cm W x 42.5 cm D).
• Weight: 41.89 pounds (19 kilograms).
• Power: 1400 watts, 110-120 volts, 50-60 hertz, 15 amps.
• Heating element: 1200 watts.
• Water tank capacity: 0.79 gallons (3 liters).
• Boiler capacity: 0.4 gallons (1.5 liters).
• Pump pressure: 15 bars.
• Made in Milan, Italy.

1. Some machines come with a thin white coating that can easily be peeled off.
2. The brew group size of this machine is 58mm. It will not fit standard E61 portafilters or other E61 parts.
3. We only sell the tank models at this time. There currently is no retro fit to turn it into direct connect.
4. GoldPro2Hole steam tip does NOT fit into this machine. If you desire an alternate steam tip, please order this steam tip.

1. Q:I noticed that when I am pulling shots the temperature remains constant. However, when I attempt to steam at the same time the PID temperature drops from 95 down into the 80s, one time as far as 82. Have I just reached the limits of my machine? Unsure if I am doing something wrong or my machine might be faulty.
   A: This is normal. You are taking temperature down in two places (espresso and steam), and 110v can not send enough power to keep up. You can do both at the same time, but there is always a 'slight' temperature loss. I have stated this either on coffeegeek.com or home-barista.com a few years ago about Pasquini machines and HX machines in general.
   Anything less than a 3-4 liter boiler, and temperature will be lost more rapidly when the steam boiler is on.
   Now, the better news. The sensor is in the steam boiler and temps the steam inside. The HX passes thru the water and steam. There is also a heater on the grouphead to keep it piping hot. So, we do not think the difference is as great as one sees.