This newer stainless steel drip tray replaces the old black plastic one. It is built to work on the older models.

Back to previous page

The power cord has been refitted to come out of the bottom of the machine instead of the side. This allows for convenient placement for your grinder on your countertop.

Back to previous page

Older models of the Mazzer Mini came with a tall bean hopper which made it hard to fit under cabinets. The newer style bean hopper brings the overall height to 17".

Back to previous page

Grinder cleaning brush now included!

Back to previous page

The adjustment wheel is removable so as to access the grinding chamber for cleaning. The small, removable black handle is used to micro-adjust the grind setting. The screw next to the handle and located on the top of the grind wheel (between numbers 0 and 1) limits the movement of the adjustment wheel to about 340 degrees. The screw can be removed to increase the range. The screw inset between number 3 and 4 is utilized to hold the hopper in place.

Back to previous page

The built-in timer allows the unit to auto-shut off after the right amount of time - in other words, you can have the Mazzer Mini grind just the right amount of coffee based on time. However, if you keep the time the same and change the grind setting, the yield will be different.

Back to previous page

This is a closeup view of the doser on the Mazzer Mini. The center knob is the adjustment knob that increases or decreases the amount of coffee that can be dispensed into the filter handle.

Back to previous page

Protective finger guard located in dosing chamber.

Back to previous page

Built-in tamper for those that want one - the built-in tamper is not required for proper operation of this grinder.

Back to previous page

Solid chrome plated espresso fork to hold the filter handle in place when the ground coffee is being dispensed from the doser.

Back to previous page